VIO-L208
Active 2- Way, 2x8"/1x1.4", 900W RMS, 100 x10°
VIO L208 is a 2-way active line array system equipped with 2x 8” neodymium woofers and 1x 1.4” neodymium compression driver (3” voice coil).
The transducers are positioned behind an all-in-one panel which acts as a phase-plug and a HF horn. The waveguide behind this panel contributes to the creation of a cylindrical wavefront, much to the advantage of hi-freq throw distance.
Each module of VIO L208 is driven by a Class-D Digipro G3 900W amp module with auto-range PSU.
A perfectly coherent emission is granted thanks to advanced sound processing with FIR filters.
The pre-amp module is also equipped with a digital optical isolation, guaranteeing interference-free input signal.
Just like larger VIO L210 system, VIO 208’s wooden enclosure comes with a built-in rigging system made for simplicity and speed: a back central rigging strand allows to set the relative splay angles, directly in the dedicated transport cart DT-VIOL208, able to house 4 modules plus 1 flying bar. While lifting up the array, the rigging strand will automatically block the systems at the preset angles with no need of heavy lifting.
The dedicated 3-point flying frame DRK 208 allows to set a precise inclination of the array and is ready to carry an optional inclinometer laser pointer. When not in use, the flybar can be easily stored in the transport cart.
AF-VIO1 accessory allows you to rig the module under a VIO S118 flyable subwoofer or, alternatively, to use VIO 208 as downfill in larger VIO L210 systems. The same accessory also serves as safety interface in stacked configuration on VIO subs.
A lighter accessory transition frame TF-VIO1 allows the installation of VIO L208 under flown VIO L210 only.
VIO L210 features on board presets allowing users to process the system manually. Any preset can be easily changed remotely via Aurora Net control software.
Technical Data
Speaker Type | 2-way Active Line Array Module |
Acoustical data
Usable Bandwidth [- 6 dB] | 75 Hz - 20 KHz |
Frequency Response [+/- 3dB] | 85 Hz -18,1 KHz |
Max SPL | 133.5 dB |
HF | 1x1.4" |
Voice Coil HF | 3" |
Type HF | Neodymium |
LF | 2x8" |
Voice Coil LF | 2" |
Type LF | Neodymium |
Horizontal Directivity | 100° |
Vertical Directivity | depends on array size and configuration |
Amplifier
Amp Technology | Digipro G3 [bi-amped] |
Amp Class | Class-D |
Power RMS | 900 W |
Peak Power | 1800 W |
Cooling | Convection |
Power Supply | 900 W SMPS with Auto-range PSU |
Processor
Controller | DSP 28/56 bit |
AD/DA Converter | 24 bit/48 KHz |
Limiter | Dual Active Peak, RMS, Thermal |
Processing (filters) | FIR Linear Phase Filters |
Crossover Frequency LF-HF | 1000 Hz |
Input
Signal Input | 1xXLR fem, Bal. |
Signal Output | 1xXLR male, Bal. |
Network | RDNet remote control RJ45 connector IN/OUT |
Mains Connections | 1x PowerCON TRUE1 In1x PowerCON TRUE1 Out |
Controls | 1xSpeakers Coupling (7 presets)1x HF Compensation (8 presets)1XInput Attenuation Rotary Switch |
Mechanics
Housing | Multiplex Plywood Polyurea painted |
Handles | 1 x Side, 2 on back |
Rain Cover | Included |
Rigging Points | Integrated 3-point flying hardware |
Width | 600 mm (25.98 in) |
Height | 260 mm (10.23 in) |
Depth | 390 mm (15.35 in) |
Weight | 18.1 Kg (39.9 lbs) |
VIO L208 is a 2-way active line array system equipped with 2x 8” neodymium woofers and 1x 1.4” neodymium compression driver (3” voice coil).
The transducers are positioned behind an all-in-one panel which acts as a phase-plug and a HF horn. The waveguide behind this panel contributes to the creation of a cylindrical wavefront, much to the advantage of hi-freq throw distance.
Each module of VIO L208 is driven by a Class-D Digipro G3 900W amp module with auto-range PSU.
A perfectly coherent emission is granted thanks to advanced sound processing with FIR filters.
The pre-amp module is also equipped with a digital optical isolation, guaranteeing interference-free input signal.
Just like larger VIO L210 system, VIO 208’s wooden enclosure comes with a built-in rigging system made for simplicity and speed: a back central rigging strand allows to set the relative splay angles, directly in the dedicated transport cart DT-VIOL208, able to house 4 modules plus 1 flying bar. While lifting up the array, the rigging strand will automatically block the systems at the preset angles with no need of heavy lifting.
The dedicated 3-point flying frame DRK 208 allows to set a precise inclination of the array and is ready to carry an optional inclinometer laser pointer. When not in use, the flybar can be easily stored in the transport cart.
AF-VIO1 accessory allows you to rig the module under a VIO S118 flyable subwoofer or, alternatively, to use VIO 208 as downfill in larger VIO L210 systems. The same accessory also serves as safety interface in stacked configuration on VIO subs.
A lighter accessory transition frame TF-VIO1 allows the installation of VIO L208 under flown VIO L210 only.
VIO L210 features on board presets allowing users to process the system manually. Any preset can be easily changed remotely via Aurora Net control software.
Technical Data
Speaker Type | 2-way Active Line Array Module |
Acoustical data
Usable Bandwidth [- 6 dB] | 75 Hz - 20 KHz |
Frequency Response [+/- 3dB] | 85 Hz -18,1 KHz |
Max SPL | 133.5 dB |
HF | 1x1.4" |
Voice Coil HF | 3" |
Type HF | Neodymium |
LF | 2x8" |
Voice Coil LF | 2" |
Type LF | Neodymium |
Horizontal Directivity | 100° |
Vertical Directivity | depends on array size and configuration |
Amplifier
Amp Technology | Digipro G3 [bi-amped] |
Amp Class | Class-D |
Power RMS | 900 W |
Peak Power | 1800 W |
Cooling | Convection |
Power Supply | 900 W SMPS with Auto-range PSU |
Processor
Controller | DSP 28/56 bit |
AD/DA Converter | 24 bit/48 KHz |
Limiter | Dual Active Peak, RMS, Thermal |
Processing (filters) | FIR Linear Phase Filters |
Crossover Frequency LF-HF | 1000 Hz |
Input
Signal Input | 1xXLR fem, Bal. |
Signal Output | 1xXLR male, Bal. |
Network | RDNet remote control RJ45 connector IN/OUT |
Mains Connections | 1x PowerCON TRUE1 In1x PowerCON TRUE1 Out |
Controls | 1xSpeakers Coupling (7 presets)1x HF Compensation (8 presets)1XInput Attenuation Rotary Switch |
Mechanics
Housing | Multiplex Plywood Polyurea painted |
Handles | 1 x Side, 2 on back |
Rain Cover | Included |
Rigging Points | Integrated 3-point flying hardware |
Width | 600 mm (25.98 in) |
Height | 260 mm (10.23 in) |
Depth | 390 mm (15.35 in) |
Weight | 18.1 Kg (39.9 lbs) |