Void Acoustics
Venu 210i V2 White
Active Sub, 2x10", 1500W RMS, + 2x750W Out
Self-Powered, 10" Low Frequency Enclosure
The Venu 210i V2 is a trail-blazing piece of pro audio equipment. Operating as a self-powered, dual 10” reflex-loaded low frequency enclosure, capable of powering up to four mid-high enclosures from its integral dual 750-Watt power modules.
Featuring DSP for Loudspeaker Control
The low frequency enclosure features DSP for loudspeaker control and advanced signal processing capabilities that can be accessed via the rear ethernet port. The Venu 210i V2 is the ultimate choice for bars, clubs, lounges; hotels and restaurants.
Key Features
- 2400 W (Up to 1500 W + 2 x 750W)
- Capable of powering up to four mid-high enclosures
- 2 x 10” low frequency transducers
- Built-in DSP with 4 preset banks
- Textured Warnex finish, optional custom colours
- Perforated steel grille
Full Specifications
- Frequency response: 40 Hz - 150 Hz ±3 dB
- Input impedance: 2 x 10 kΩ balanced
- Output: 122 dB cont, 128 dB peak
- Driver configuration: 2 x 10” LF
- Weight: 31 kg (68.3 lbs)
- Enclosure: 15 mm birch plywood
- Finish: Textured Warnex
- Grille: Perforated steel - foam filter
- Power: Neutrik powerCON
- Input: Combo XLR and 1/4” jack
- Power rating: 1500 W (for LF) 2 x 750 W at 4 Ω
- Nominal power requirement: AC 100 V - 240 V, 50/60 Hz with PFC
- Consumption Standby: < 1 W, Idle 13.5 W, 1/4 of max output power @ 8 Ω 600 W
Self-Powered, 10" Low Frequency Enclosure
The Venu 210i V2 is a trail-blazing piece of pro audio equipment. Operating as a self-powered, dual 10” reflex-loaded low frequency enclosure, capable of powering up to four mid-high enclosures from its integral dual 750-Watt power modules.
Featuring DSP for Loudspeaker Control
The low frequency enclosure features DSP for loudspeaker control and advanced signal processing capabilities that can be accessed via the rear ethernet port. The Venu 210i V2 is the ultimate choice for bars, clubs, lounges; hotels and restaurants.
Key Features
- 2400 W (Up to 1500 W + 2 x 750W)
- Capable of powering up to four mid-high enclosures
- 2 x 10” low frequency transducers
- Built-in DSP with 4 preset banks
- Textured Warnex finish, optional custom colours
- Perforated steel grille
Full Specifications
- Frequency response: 40 Hz - 150 Hz ±3 dB
- Input impedance: 2 x 10 kΩ balanced
- Output: 122 dB cont, 128 dB peak
- Driver configuration: 2 x 10” LF
- Weight: 31 kg (68.3 lbs)
- Enclosure: 15 mm birch plywood
- Finish: Textured Warnex
- Grille: Perforated steel - foam filter
- Power: Neutrik powerCON
- Input: Combo XLR and 1/4” jack
- Power rating: 1500 W (for LF) 2 x 750 W at 4 Ω
- Nominal power requirement: AC 100 V - 240 V, 50/60 Hz with PFC
- Consumption Standby: < 1 W, Idle 13.5 W, 1/4 of max output power @ 8 Ω 600 W
Spécifications
| Farbe | Schwarz ou Weiss |